服务热线 18660772233
0531-55536261
联系在线客服

自动门电机的原理有哪些?

来源:http://www.jnmcd.com 发布时间:2019-04-26 浏览:
首先,平移式自动门机组由以下部件组成:
Firstly, the translational automatic door unit is composed of the following components:
(1)主控制器:它是自动门的指挥中心,经过内部编有指令程序的大范围集成块,发出相应指令,指挥马达或电锁类系统工作;同时人们经过主控器调理门扇开启速度、开启幅度等参数。
(1) Main Controller: It is the command center of automatic door. It sends out corresponding instructions through a large-scale integrated block with internal instruction program to direct the motor or electric lock system. At the same time, people adjust the opening speed and opening range of the door fan through the main controller.
(2)感应探测器:担任采集外部信号,好像人们的眼睛,当有挪动的物体进入它的工作范围时,它就给主控制器一个脉冲信号;
(2) Induction Detector: as the collection of external signals, like people's eyes, when a moving object enters its working range, it gives the main controller a pulse signal;
(3)动力马达:提供开门与关门的主动力,控制门扇加速与减速运转。
(3) Power motor: Provide the initiative to open and close the door, control the acceleration and deceleration of the door.
(4)门扇行进轨道:就象火车的铁轨,约束门扇的吊具走轮系统,使其按特定方向行进。
(4) Door-fan traveling track: like the railway track of a train, the lifting wheel system of the door-fan is restrained to move in a specific direction.
自动门电机工作原理是什么?
What is the working principle of automatic door motor?
山东自动门电机
(5)门扇吊具走轮系统:用于吊挂活动门扇,同时在动力牵引下带动门扇运转。
(5) Door-fan crane wheel system: used for hanging movable door-fan and driving the door-fan to run under power traction.
(6)同步皮带(有的厂家运用三角皮带):用于传输马达所产动力,牵引门扇吊具走轮系统。
(6) Synchronized belt (some manufacturers use triangular belt): used to transfer the power produced by motor, traction door and fan suspension wheel system.
(7)下部导向系统:是门扇下部的导向与定位安装,避免门扇在运转时呈现前后门体摆动。
(7) Lower guiding system: It is the guiding and positioning installation of the lower part of the door fan to avoid the front and rear door body swing when the door fan is running.
当门扇要完成一次开门与关门,其工作流程如下:
When the door is to be opened and closed once, the work flow is as follows:
感应探测器探测到有人进入时,将脉冲信号传给主控器,主控器判别后通知马达运转,同时监控马达转数,以便通知马达在一定时分加力和进入慢行运转。马达得到一定运转电流后做正向运转,将动力传给同步带,再由同步带将动力传给吊具系统使门扇开启;门扇开启后由控制器作出判别,如需关门,通知马达作反向运动,关闭门扇。
When an induction detector detects someone entering, it transmits the pulse signal to the main controller. After the main controller distinguishes, it notifies the motor to run. At the same time, it monitors the speed of the motor, so as to inform the motor to add force at a certain time and to slow down. When the motor gets a certain running current, it runs forward, transfers power to the synchronous belt, and then transfers power to the hanger system by the synchronous belt to make the door fan open. After the door fan opens, the controller makes a judgment, if it needs to close the door, notifies the motor to move backwards, and closes the door fan.
推荐新闻
  • 联系人:张经理
  • 手机:18660772233(微信同号)
  • 电 话:0531-55536261 / 0531-55536272
  • 邮 箱:911510021@qq.com
  • 地 址:山东济南市济南时代欧亚电子大厦一楼A111号
  • Copyright © 2018 济南美磁达电子有限公司 All Rights Reserved 诺商信息 网站地图 XML TXT  鲁ICP备18050301号-1

    鲁公网安备 37010502001057号