来源：http://www.jnmcd.com 发布时间：2019-07-26 浏览：次
There are three main types of translation doors: aluminium alloy, stainless steel and galvanized ones. But nowadays, the most widely used one is automatic translation doors. The automatic translation doors can be converted manually and electronically. The daily operation is also single track, with two types of load-bearing and load-bearing. If the automatic translation door wants to operate normally, it is inseparable from the correct device of the motor. The following small edition will bring you the device method of the translation door motor.
The method for the motor device of the translation door is as follows.
1. Local operation
Operating button box is usually set beside the door, which can be controlled by opening, stopping and closing buttons on the top of the control button box to stop the opening and closing of the door body. It can also stop itself when the door body is in a set position.
2. Remote operation, think about safety and do not recommend its application
It can control the opening and closing of the door body through the buttons of opening, stopping and closing on the remote controller. It can complete the remote operation of the translation door motor.
3. Manual and electric switching
On the motor of the translation door, a clutch is also installed. Whenever the power is cut off, the clutch can be released manually. The driver can be changed from electric to manual, and the door can be opened and closed manually by pushing and pulling the door fan.
Most of the translation doors, in fact, are driven by the motor of the translation door, which can be applied in multiple centers. Usually manual and electric operation are very suitable.
With the summary of Shandong automatic door motor, I hope it will be helpful to our customers. If you don't understand or ask for help, please click on our website: http://www.jnmcd.com or call for consultation. We will try our best to solve it for you.
Copyright © 2018 济南美磁达电子有限公司 All Rights Reserved