服务热线 18660772233
0531-55536261
联系在线客服

微型减速机怎么拆开?

来源:http://www.jnmcd.com 发布时间:2019-07-09 浏览:
1、拆下润滑油泵。
1. Remove the lubricant pump.
2、拧开机座底部油塞,放净润滑油。
2. Turn on the oil plug at the bottom of the machine base and put the lubricating oil in place.
3、松开紧固螺栓,分开机座有些与针齿轮有些。
3. Loosen the fastening bolt and separate the base from the pin gear.
4、取出轴销套。
4. Remove the shaft pin sleeve.
5、拆下转臂前端的挡垫,取出摆线齿轮Ⅱ。
5. Remove the shield at the front end of the rotary arm and take out the cycloidal gear II.
6、取出转臂及其轴承组合件。
6. Remove the rotary arm and its bearing assembly.
7、取出阻隔环和摆线齿轮Ⅰ。
7. Remove barrier ring and cycloidal gear I.
8、拆开摆线齿轮时,牢记其断面符号字头的位置。
山东微型电机
8. When disassembling cycloidal gears, keep in mind the position of the cross-section symbol header.
以上即是关于微型减速机拆开过程的引见,拆开时要按照精确的次序方法,防止中心呈现问题。如有疑问,请来电咨询。
Above is the introduction about the process of micro reducer disassembly. When disassembling, we should follow the precise sequence method to prevent the center from showing problems. If you have any questions, please call for consultation.
微型电机的外形结构与电磁式相同,如旋转类产品作成圆柱形,直线类产品作成方形,但内部结构因其作业原理不一样而不同很大,我们从外观上可以看出,优质的微型电机运用铝外壳,其主要要素是:
The exterior structure of micro-motor is the same as that of electromagnetic type. For example, rotating products are cylindrical and linear products are square. But the internal structure of micro-motor varies greatly because of its different working principles. From the exterior, we can see that high-quality micro-motor uses aluminium shell. Its main elements are as follows:
1、微型电机运用铝外壳可以使微型电机重量更轻:因金属铝的重量轻,相对而言,可以减少整机的重量。便当安装和转移。
1. The use of aluminium shell can make the micro-motor lighter: because the weight of metal aluminium is lighter, the weight of the whole machine can be reduced relatively. Installation and transfer of convenience.
2、运用铝外壳的散热性十分好:微型电机在作业状况下,由于高速运转,微型电机自身发作过高温度需求得以释放,我们晓得铝的散热才能强,因此如今微型电机厂家都运用铝制外壳来做为电机的外壳。
2. The heat dissipation of aluminium shell is very good: in the working condition, because of the high-speed operation, the high temperature demand of the micro motor itself can be released, we know that the heat dissipation ability of aluminium is strong, so now the micro motor manufacturers use aluminium shell as the shell of the motor.
各类微型电机的功用不同很大,其功用参数难以分歧阐明。可是,通常状况下,微型电机运用铝外壳都是有相同的要素和方法,我们可以在生活中不时地停止调查。
The functions of all kinds of micro motors are very different, and their functional parameters are difficult to be elucidated differently. Usually, however, the use of aluminium enclosures in micro motors has the same elements and methods, and we can stop investigating from time to time in our lives.
以上的精彩内容由山东微型电机提供技术支持,本站还有很多的精彩内容等您查看,欢迎您继续关注我们的网站:http://www.jnmcd.com待您的关注!
The above wonderful content is supported by Shandong Micro Motor. There are many wonderful contents waiting for you to check. You are welcome to continue to pay attention to our website: http://www.jnmcd.com. Looking forward to your attention!
推荐新闻
  • 联系人:张经理
  • 手机:18660772233(微信同号)
  • 电 话:0531-55536261 / 0531-55536272
  • 邮 箱:911510021@qq.com
  • 地 址:山东济南市济南时代欧亚电子大厦一楼A111号
  • Copyright © 2018 济南美磁达电子有限公司 All Rights Reserved 诺商信息 网站地图 XML TXT  鲁ICP备18050301号-1

    鲁公网安备 37010502001057号