服务热线 18660772233
0531-55536261
联系在线客服

直流减速电机你知道多少?

来源:http://www.jnmcd.com 发布时间:2019-01-17 浏览:
直流减速电机力矩的计算:
Torque calculation of DC deceleration motor:
1、知道扭矩和减速机输出转数及运用系数,求直流减速电机所需配电机功率如下公式:
1. Knowing the torque and the output speed of the reducer and the operating coefficient, the following formulas are used to calculate the distribution power required by the DC deceleration motor:
电机功率=扭矩÷9550×电机功率输入转数÷速比÷运用系数。
Motor power = torque_9550 * motor power input speed ratio coefficient.
2、知道直流减速电机的功率和速等到运用系数,求减速机扭矩如下公式:
2. Knowing the power and speed of the DC deceleration motor and its operating coefficients, the following formulas are used to calculate the torque of the decelerator:
减速机扭矩=9550×电机功率÷电机功率输入转数×速比×运用系数。
Reducer torque = 9550 * motor power motor power input speed * speed ratio * operating coefficient.
直流减速电机选购要点:
Main points of selecting and purchasing DC decelerating motor:
1、选购前断定它的运用途径,使用场景,列出环境要求、工作温度、背隙等因素;
1. Determine the way to use it before purchasing, use scenarios, list environmental requirements, working temperature, backlash and other factors;
2、首要断定需求什么样的直流减速机,比方小功率、扭矩大、转速低、噪音、耗能、参数等功率、功能要求;
2. First of all, determine what kind of DC reducer is needed, such as low power, high torque, low speed, noise, energy consumption, parameters and other power and functional requirements.
3、接下来断定输出轴扭矩、安转办法、维护保养办法;
3. Next, the methods of output shaft torque, safe rotation and maintenance are determined.
4、其次断定输入传动轴转速和减速比;
4. Secondly, the speed and deceleration ratio of the input drive shaft are determined.
5、依据法兰巨细选直流减速电机,如输出轴扭矩不足回到第二步重新匹配。
5. Select the DC deceleration motor according to the flange size, if the output shaft torque is insufficient, return to the second step to re-match.
直流减速电机的清洗原则:
Cleaning principle of DC deceleration motor:
1、保证满意对电机零件清洁程度的要求,在修补中,各种不同的机件,对清洁的要求程度是不相同的。清洗时必须依据不同的要求,采纳不同的清洗剂和清洗办法,保证所要求的清洗质量。
1. Guarantee satisfactory requirements for cleanliness of motor parts. In repairing, different parts have different requirements for cleanliness. In order to ensure the required cleaning quality, different cleaning agents and methods must be adopted according to different requirements.
2、防止直流电机零件的腐蚀,对精细零件不允许有任何程度的腐蚀。当零件清洗后需停放一段时问时,应考虑清洗液的防锈能力或考虑其他防锈措施。
2. Prevent the corrosion of DC motor parts, and do not allow any degree of corrosion to fine parts. When parts need to be parked for a period of time after cleaning, the anti-rust ability of cleaning fluid or other anti-rust measures should be considered.
3、确保操作安全,防止引起火灾对环境造成污染。
3. Ensure the safety of operation and prevent fire from polluting the environment.
以上信息是我们山东微型电机整理发布希望对大家有点帮助我们的网站是:http://www.jnmcd.com
The above information is our Shandong micro-motor sorting and publishing hope to help you a little bit of our website is: http://www.jnmcd.com!
推荐新闻
  • 联系人:张经理
  • 手机:18660772233(微信同号)
  • 电 话:0531-55536261 / 0531-55536272
  • 邮 箱:911510021@qq.com
  • 地 址:山东济南市济南时代欧亚电子大厦一楼A111号
  • Copyright © 2018 济南美磁达电子有限公司 All Rights Reserved 诺商信息 网站地图 XML TXT  鲁ICP备18050301号-1

    鲁公网安备 37010502001057号