来源：http://www.jnmcd.com 发布时间：2020-06-04 浏览：次
In the process of using Shandong micromotor motor, there is often sudden blocking. If this problem is not solved, it is easy to damage the motor. In fact, the blocking of micromotor is caused by various reasons. When looking for solutions, find the right solutions. So how do micromotors prevent clogging?
First, control current
In the process of removing micromotor, there is no current passing through, only kinetic energy can be converted into heat energy, which is easy to lead to electric heating. The phenomenon of heat energy mainly comes from the increase of current, opening time, large current and very small resistance, so we need to set the current movement to the appropriate level.
The resistance of micromotor is very high in normal operation. According to the principle of series resistance, when the series resistance is blocked, the induction resistance of the motor is very small, far less than the series resistance. Therefore, series resistance can better protect the voltage of motor and battery.
3 timely detection circuit
The detection of the circuit of micromotor is regular and frequent. Due to different seasons, use time and environment, the circuit has certain loss. We should check the circuit regularly to prevent the occurrence of circuit fault.
In fact, as long as the blocking phenomenon occurs, as long as the cause is found in time, it is not difficult to solve it. For the normal use of the micro motor, adjust the operation of the motor in time, from the current, voltage and resistance.
Copyright © 2018 济南美磁达电子有限公司 All Rights Reserved